Dell PowerConnect W-IAP3WN User Manual page 61

7. This tab allows you to configure the captive portal page and encryption for the Guest network. Select one of
the following splash page type:
Table 11
Splash Page Type
Internal — Authenticated
Internal — Acknowledged
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0 | User Guide
Conditions for Adding a Guest Network— Security Tab
Description and steps to set up
The user has to accept the terms and conditions and enter a username and password on
the captive portal page. If this option is selected, then add the users who are required to
use the captive portal authentication to the user database. Click the Users link to add the
users. For information about adding a user, see
information on customizing the splash page, see
page
1. Select the required Authentication server 1 option from the drop-down list. Available


2. Reauth interval — When set to a value greater than zero, the Access Points will
3. Blacklisting — Select Enabled if you want clients to be blacklisted after a certain
4. Max authentication failures — Users who fail to authenticate the number of times
5. For Internal users —Click Users to populate the system's internal authentication
6. Click Upload Certificate and browse to upload a certificate file for the internal
7. Redirect URL— Users can be redirected to a specific URL (instead of the original
The user has to accept the terms and conditions for this splash page type.
For information on customizing the splash page, see
page
1. Encryption— Select Enabled from the Encryption drop-down list and perform the



2. Passphrase format— Specify either an alphanumeric or a hexadecimal string.
3. Passphrase— Enter a pre-shared key (PSK) passphrase.
120.
options are:
New — If you select this option, then an external radius server has to be configured
to authenticate the users. For information on configuring an external RADIUS server,
see "Configuring an External RADIUS Server" on page
Internal Server — If you select this option, then users who are required to
authenticate with the internal RADIUS server must be added. Click the Users link to
add the users. For information on adding a user, see
periodically reauthenticate all associated and authenticated clients.
number of authentication failures.
specified here will be dynamically blacklisted. The maximum value for this entry is
10.
server with users. For information about adding a user, see "Adding a User" on
page 161.
server. See "Certificates" on page 129
URL) after successful captive portal authentication. This entry is optional.
120.
following steps (these steps are optional):
Select the required key management option from the Key management drop-down
list. Available options are:
WPA-2 Personal
WPA Personal
Both (WPA-2 & WPA)
Ensure that the hexadecimal string must be exactly 64 digits in length.
"Adding a User" on page
"Customizing a Splash Page" on
110.
"Adding a User" on page
for more information.
"Customizing a Splash Page" on
Wireless Network | 61
235. For
235.