Ids - Dell PowerConnect W-IAP3WN User Manual

Figure 32
For more information about alerts, see

IDS

This link displays a list of foreign APs and foreign clients that are detected in the network. It consists of the
following sections:
Foreign Access Points Detected— Lists the APs that are not controlled by the Virtual Controller. The

following information is displayed for each foreign AP:
Mac address— Displays the Mac address of the foreign AP.

Network— Displays the name of the network to which the foreign AP is connected.

Classification— Displays the classification of the foreign AP: Interfering IAP or Rogue IAP.

Channel— Displays the channel in which the foreign AP is operating.

Type— Displays the Wi-Fi type of the foreign AP.

Last seen— Displays the time when the foreign AP was last detected in the network.

Where— Provides information about the IAP that detected the foreign AP. Click the pushpin icon to view

the information.
Foreign Clients Detected— Lists the clients that are not controlled by the Virtual Controller. The following

information is displayed for each foreign client:
Mac address— Displays the Mac address of the foreign client.

Network— Displays the name of the network to which the foreign client is connected.

Classification— Displays the classification of the foreign client: Interfering client.

Channel— Displays the channel in which the foreign client is operating.

Type— Displays the Wi-Fi type of the foreign client.

Last seen— Displays the time when the foreign client was last detected in the network.

Where— Provides information about the IAP that detected the foreign client. Click the pushpin icon to

view the information.
For more information on the intrusion detection feature, see
40 | Instant User Interface
Active Faults
Chapter 25, "Alert Types and Management"
Chapter 18, "Intrusion Detection System"
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0 | User Guide
.
.