Examples For Access Rules; Allow Tcp Service To A Particular Network - Dell PowerConnect W-IAP3WN User Manual

Table 23
Destination
To a particular server
Except to a particular server
To a network
Except to a network

Examples for Access Rules

This section provides procedures to create the following access rules.

Allow TCP Service to a Particular Network


Allow POP3 Service to a Particular Server

Deny FTP Service except to a Particular Server

Deny bootp Service except to a Particular Network

Allow TCP Service to a Particular Network
1. Click the New link in the Networks tab.
To define the access rule to an existing network, click the network. The edit link appears. Click the edit link
and navigate to the Access tab.
2. In the WLAN Settings tab, enter the appropriate information. and click Next to continue.
3. Use the VLAN tab, to specify how the clients on this network will get their IP address and VLAN.Click Next
to continue.
4. Click Next and set appropriate values in the Security tab.
5. Click Next. The Access tab appears. The Allow any to all destinations access rule is enabled by default. This
rule allows traffic to all destinations. To define allow TCP service access rule to a particular network, perform
the following steps:
a. Click New, the New Rule window appears.
b. Select Allow from the Action drop-down list.
c. Select custom from the Service drop-down list.


d. Select to a network from the Destination drop-down list.


150 | Instant Firewall
Destination Options (Continued)
Description
Access is allowed or denied to a particular server. You have to specify the IP
address of the server.
Access is allowed or denied to servers other than the specified server. You have to
specify the IP address of the server.
Access is allowed or denied to a network. You have to specify the IP address and
netmask for the network.
Access is allowed or denied to networks other than the specified network. You
have to specify the IP address and netmask for the network.
Select TCP from the Protocol drop-down list.
Enter appropriate port number in the Port(s) text box.
Enter appropriate IP address in the IP text box.
Enter appropriate netmask in the Netmask text box.
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0 | User Guide