Dell PowerConnect W-IAP3WN User Manual page 48

Table 6
If
You want to use the default security level, Personal
48 | Wireless Network
Conditions for Adding an Employee Network— Security Tab (Continued)
then,
Perform the following steps:
1. Select the required key options from the Key management drop-down
list. Available options are:
 WPA-2 Personal
WPA Personal

 Both (WPA-2 & WPA)
 Static WEP
If you have selected Static WEP, do the following:
Select appropriate WEP key size from the WEP key size drop-down

list. Available options are 64-bit and 128-bit.
Select appropriate Tx key from the Tx Key drop-down list. Available

options are 1, 2, 3,and 4.
 Enter an appropriate WEP key and reconfirm.
For more information on encryption and recommended
encryption type, see Chapter 11, "Encryption"
2. WPA-2 Personal— Select a passphrase format from the Passphrase
format drop-down list. Available options are:
8-63 alphanumeric chars

 64 hexadecimal chars
3. Enter a passphrase in the Passphrase text box and reconfirm.
4. Select the required option from the MAC authentication drop-down
list. Available options are
Enabled and Disabled

When Enabled, user must configure at least one RADIUS server for
authentication server. See
details.
5. Authentication server 1— Select the required Authentication server
option from the drop-down list. Available options are:
New— If you select this option, an external radius server has to be

configured to authenticate the users. For information on configuring
an external RADIUS server, see
6. Reauth interval— When set to a value greater than zero, the Access
Points will periodically reauthenticate all associated and
authenticated clients.
7. Blacklisting— Select Enabled if you want clients to be blacklisted
after a certain number of authentication failures.
8. Max authentication failures— Users who fail to authenticate the
number of times specified here will be dynamically blacklisted. The
maximum value for this entry is 10.
9. InternalServer— If you select this option, users who are required to
authenticate with the internal RADIUS server must be added. Click
the Users link to add the users.For information on adding a user, see
"Adding a User" on page
NOTE: Navigate to PEF > Blacklisting in the WebUI to specify the duration
of the blacklisting on the Blacklisting tab of the PEF window.
10. Click Upload Certificate and browse to upload a certificate file for the
internal server. See
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0 | User Guide
.
"MAC Authentication" on page 127
Chapter 10, "Authentication"
235.
"Certificates" on page 129 for more information.
for further
.