Four levels of detection can be configured in the WIP Detection page— Off, Low, Medium, and High (as shown
in
Figure
Figure 139
The following table describes the detection policies that are enabled in Infrastructure Detection Custom settings
box.
Table 26
Detection Level
Off
Low
Medium
166 | Intrusion Detection System
139).
Wireless Intrusion Protection— Detection
Infrastructure Detection Policies
Detection Policy
Rogue Classification
Detect AP Spoofing
Detect Windows Bridge
IDS Signature— Deauthentication Broadcast
IDS Signature— Disassociation Broadcast
Detect Adhoc networks using VALID SSID— Valid SSID list will be auto-configured based on
Instant AP configuration
Detect Malformed Frame— Large Duration
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0 | User Guide