Multi-Feed; Skew - Ricoh Fx880 Service Manual

November 28th, 1995

3. Skew

Possible Cause:
A non-recommended type of paper is being used.
The corner separators in the paper feed unit are out of position.
The paper feed rollers are worn out or damaged.
Obstructions in the paper path.
Malfunction in the registration mechanism.
Action:
1. Check if an acceptable type of paper is being used.
2. Check that the corner separators in the paper cassette are correctly posi-
tioned.
3. Check that the paper feed rollers are correctly installed and clean or re-
place them if necessary.
4. Check for obstructions in the paper path.
5. Clean the registration roller and replace the TIJ unit if necessary.

4. Multi-feed

Possible Cause:
A non-recommended type of paper is being used.
Incorrect positioning of the corner separator in the paper feed unit.
Action:
Check if an acceptable type of paper is being used.
Check that the corner separators are properly positioned.
6-13
TROUBLESHOOTING
MECHANICAL PROBLEMS