Table of Contents
Advertisement
Batch Page Numbering (Page Counter)
This setting is used to change the page numbering of the transmitted document from
simple numbering ("P.1", "P.2", etc.) to batch numbering, which means that a slash
and the total number of pages being sent is added after each page number (for
example, "P. 1/5", "P.2/5", etc.). This allows the receiver to check for any missing
pages.
If you are sending a cover sheet, do not include the cover sheet in the total number
of pages. Your fax will adjust the number to include the cover sheet automatically.
If you need to cancel a batch number entry, remove the document from the feeder
or press the STOP key.
If the number of pages actually transmitted does not coincide with the batch number
entered, the alarm will sound and PAGE COUNT ERROR will appear in the display.
"PAGE E" will also appear in the "NOTE" column of the Transaction Report if it has
been set to print out.
Step
Press these keys:
FUNCTION
1
1
2
Note:
Batch page numbering is automatically evoked whenever documents are sent from
memory, i.e., Memory transmission or Broadcasting.
Comments
PAGE COUNTER SET will appear in the display.
0
Enter the total number of pages (2 digits - "01" to
(Example)
"99") by pressing the numeric keys.
BASIC OPERATIONS
SENDING DOCUMENTS
3-5
Advertisement
Table of Contents
