Entering Your Name And Fax Number - Sharp FO-2600 Operation Manual

ENTERING YOUR NAME AND FAX NUMBER

To have your name and fax/telephone number (called the "Sender's name" and
"Sender's number") printed at the top of every page you transmit, program them by
pressing the panel keys as shown below.
If you enter an incorrect number or letter, press the R key to move the cursor back
to the mistake, then enter the correct number or letter. (To move the cursor forward,
press the SPEAKER key.)
Step Press these keys:
FUNCTION
1
2
S T A R T
3
5 5
5
4
S T A R T
5
PQRS PQRS
7 7
GHI GHI
4
4
ABC ABC
2 2
PQRS PQRS
6
7 7
SPEAKER
PQRS PQRS
7 7
(Example: "SHARP")
S T A R T
7
STOP
8
Note:
To confirm that you have correctly entered your name and number, print out the
Passcode List (see Chapter 7). This list also shows a sample of what will be printed at
the top of every page you transmit (" HEADER PRINT ").
2-2
Comments
3
"ENTRY MODE" will appear in the display.
"OWN NUMBER SET" will appear in the display.
Enter your fax number (max. of 20 digits) by
pressing the numeric keys. (To insert a space
1 2 3 4
between digits, press the "#" key. To insert a "+",
(Example)
press the " " key.)
PQRS PQRS PQRS
7 7 7
GHI
4 Enter your name by pressing the appropriate
numeric keys as shown on the following page.
Press each key repeatedly until the desired letter
PQRS PQRS
appears in the display.
7 7
(Max. of 24 characters.)
Exit.
INITIAL SETTINGS