Table of Contents
Advertisement
The paper tray holds the paper on which received documents and copies are printed.
Up to 100 sheets of A4 size paper from 60 to 90 g/m
Caution!
Do not use paper which has already been printed on one side by a laser printer or copier.
This may damage the roller in the fusing unit, causing poor printing quality and frequent
paper jams.
Note:
Plain paper has a "print" side which should be used to obtain the best print quality. The
print side is not visible to the naked eye, so check the label on the end of the package
before removing the paper. The print side will be indicated by an arrow, symbol, or
wording. Load the paper in the tray print side up as described below.
1
2
3
4
1-10
LOADING PRINTING PAPER
Remove the paper tray cover.
Fan the paper, and then tap the edge
against a flat surface to even the
stack.
Pull the lever on the right side of the
paper tray (marked "PULL") toward
you.
Insert the paper into the tray, print
side up.
INSTALLATION
2
can be loaded in the tray.
Advertisement
Table of Contents
