Table of Contents
Advertisement
Polling allows you to request another fax machine to send a document to your fax
machine. In other words, the receiving fax machine, not the transmitting fax machine,
activates the transmission. You can use your fax to both poll and be polled by others.
Setting the polling key
To use the polling function, you must first set Rapid Key 16/POLL for use as a polling
key. This is done by pressing the panel keys as shown below.
The polling key cannot be used for both Rapid Key Dialling and Polling. If it has
already been programmed for Rapid Key Dialling, you must clear it first as
described in "Storing Numbers for Automatic Dialling" in Chapter 2.
Step
Press these keys:
FUNCTION
1
2
1
3
S T A R T
4
STOP
5
Polling others
1
SPEED
(Example)
POLLING
Comments
3
ENTRY MODE will appear in the display.
POLLING FUNCTION will appear in the display.
Press "1" to turn the polling function on, or "2" to
or
2
turn it off.
Exit.
Dial the fax machine you want to poll
using one of the following methods:
0
1
SPECIAL FUNCTIONS
Pick up the handset (or press the
SPEAKER key) and dial the full
number. Wait for the fax answerback
tone.
Press the SPEED key and enter a
2-digit Speed Dial number.
Enter the full number using the
numeric keys.
5-7
Advertisement
Table of Contents
