Assembly And Connections - Sharp FO-2600 Operation Manual

ASSEMBLY AND CONNECTIONS

Handset
Power lead
Telephone line cord
.
T E L
. E
T E L L I N
S E T
1-6
Connect the handset lead to the
handset and the fax as shown.
The ends of the handset lead are
identical, so they will go into either
socket.
Place the handset on the handset rest.
Use the handset to make ordinary
phone calls, or to transmit and
receive documents manually.
Plug the power lead into a 230 V,
50 Hz, grounded (3-prong) AC outlet.
Important: Whenever you unplug the
power lead, disconnect the fax
machine from the telephone network
first.
Caution: The mains outlet
(socket-outlet) shall be installed near
the equipment and shall be easily
accessible.
Press the power switch to turn on the
power.
Plug one end of the telephone line
cord into the socket on the fax marked
"TEL. LINE". Plug the other end into a
standard telephone wall socket.
Be sure to plug the line cord into the
TEL. LINE socket on the fax. Do not
plug it into the TEL. SET socket.
Note: Connection to the telephone
network must not be hard wired.
INSTALLATION