Table of Contents
Advertisement
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either automatically with the AUTO IMAGE key or
manually with the PRESET RATIO selector (
function enables precise copy ratio selection from 50% to 200% in 1% increments.
,
) keys and/or the zoom (
Automatic
Place the original on the original table or in the document
1
feeder tray.
G
If the original is placed in the document feeder tray, the ORIGINAL
SIZE indicator for the detected size will light up.
If the original is placed on the original table, press the
2
ORIGINAL SIZE ENTER key until the indicator for the
size of the original on the original table lights up.
G
This feature will not work when copy paper of non-standard size is
used or the bypass tray is used.
AL-1622 only Use the TRAY SELECT key to select the
3
paper tray with the desired paper size.
Press the AUTO IMAGE key.
4
G
The copy ratio will be automatically set.
G
If a PRESET RATIO indicator is blinking, part of the original image
may not be copied.
If the orientation of the original does not correspond to
standard reduction/enlargement ratios for the selected
paper tray, then the ORIGINAL SIZE indicator will
blink. Change the orientation of the original.
Set the number of copies.
5
Press the START key.
6
G
To cancel the automatic reduction/enlargement
mode, press the AUTO IMAGE key again.
G
When copying from the SPF with this feature, the
automatic reduction/enlargement mode will be
automatically cancelled after copying is complete.
,
) keys. The zoom
21
Advertisement
Table of Contents
