Sharp AL-1611 Operation Manual page 43

Roller rotating knob
Fusing unit release lever
Turn the roller rotating knob in the direction of the
2
arrow.
Carefully remove the misfed paper. Lower the fusing
3
unit release levers to allow easier removal. Return the
release levers to their operating positions.
The fusing unit is hot. Take care in removing paper.
G
Do not touch the surface of the drum (green portion) of
the drum cartridge when removing the misfed paper.
Doing so may damage the drum and cause smudges
on copies.
G Be careful about unfixed toner on the misfed paper not
to soil your hands or clothes.
Close the front cover by pushing both sides with your
4
hands and then close the side cover by pressing the
handle on the cover.
G
The misfeed ( ) indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
C. Misfeed in the transport area
Open the paper guide by pressing down the projection
1
on either side of the guide and remove the misfed paper.
The fusing unit is hot. Take care in removing paper.
If the misfed paper cannot be removed by the previous
2
step but is visible in the paper output area, remove the
paper by pulling it into the paper output area.
MISFEED REMOVAL
41