Table of Contents
Advertisement
Program No. 15: Resetting account
Program No. 15 is used to reset all accounts or to reset any desired individual
account. When program No. 15 is entered, "0" will blink on the right side of
the copy quantity display.
G
If no account number has been registered, "15E" will appear in the copy
quantity display. Press the
page 46.
key. The copier will return to step 2 on
1.
To reset an individual account, press the 0 key.
To reset all accounts, press key 1.
2.
Press the START key.
G
If you have pressed the 0 key in step 1, an account number will appear
in the copy quantity display. Proceed to step 3.
G
If you have pressed key 1, the number of copies against all account
numbers will be reset. Proceed to step 5.
3.
Use the copy ratio display (
number to be reset.
G
Use the
4.
Press the START key.
G
The number of copies against the specified account number will be
reset.
5.
To continue with other user programs, enter another
program number. To exit the user program mode, press
the light (
USER PROGRAMS
) key to select the account
key to advance through the account numbers.
) key.
51
Advertisement
Table of Contents
