Watching Tv; Daily Operation - Sharp AQUOS LC-40LE924RU Operation Manual

Watching TV

Daily operation

Switching on/off
Turning on/off the power
1
Turn on (;) the MAIN POWER switch on the
rear of the TV (Page 5).
2
To turn on the TV, press <a on the TV
or >a on the remote control unit.
3
To turn off the TV, press <a on the TV
or >a on the remote control unit.
4
Turn off (a) the MAIN POWER switch on the
rear of the TV (Page 5).
• When turning off the power using the MAIN POWER
switch on the rear of the TV, EPG data will be lost.
Standby mode
To standby mode
E
If the MAIN POWER switch on the rear of the TV is
turn on (;), you can switch it to standby by pressing
<a on the TV or >a on the remote control unit.
Switching on from standby
E
From standby, press <a on the TV or >a on
the remote control unit.
NOTE
• If you are not going to use this TV for a long period of time, be
sure to remove the AC cord from the AC outlet or turn off (a)
the MAIN POWER switch on the rear of the TV (Page 5).
• A small amount of electric power is still consumed even when
the MAIN POWER switch is turned off (a) (Page 5).
18
Switching between digital,
satellite and analogue broadcasts
Watching digital
broadcasts
Watching satellite
broadcasts
NOTE
• If a number of satellite channels are set, each time you press
the SAT button the channel switches as follows.
SAT1
SAT4
Changing channels
With :r/s
Watching analogue
broadcasts
SAT2
SAT3
With 0_9