NEC Express5800/320Fd-LR User Manual page 142

4-16 System Configuration
Advanced Chipset Control
When you select "Advanced Chipset Control" in the Advanced menu, the following screen appears.
Main Advanced
Advanced Processor Configuration
HPET
Inter(R) I/OAT: [Enabled]
Wake On LAN:
F1 Help ↑↓ Select Item
Esc Exit ←→ Select Menu
Refer to the table below for information on options.
Option
HPET
Intel(R) I/IOAT
Wake On LAN
IMPORTANT:
Under Wake On LAN environment
When you disconnect either or both of the AC cables on the server and the Alternate
Current supply is stopped, the Wake On LAN function becomes unavailable on the next
system launch after the electricity supply starts. You need to connect the cables to both
equipments to supply the electricity, and press the power switch to start the system.
On the OS, go to [Start] - [Management Tool] - [Computer Management] and select the
Device Manager. Double click [Stratus emb-EB 2-Port Gigabit Adapter #n] under the
network adapter, then select the following option from [Power Management] tab:
Wake On Magic Packet from power off state
ftServer Setup
Security Server
[Disabled]
[Enabled]
-/+
Enter Select
Parameter
[Enabled]
Disabled
[Enabled]
Disabled
[Enabled]
Disabled
Boot
Item Specific Help
Enable or Disable
High Precision Event
Timer (HPET)
Change Values
Sub Menu
Description
Specify whether or not to enable High
Precision Timer feature.
Specify whether or not to enable Intel(R)
I/IOAcceleration Technology feature.
Specify whether or not to enable network
remote power-on feature.
Exit
F9 Setup Defaults
F10 Save and Exit
[ ]: factory default