NEC Express5800/320Fd-LR User Manual page 151

Monitoring Configuration
Select "Monitoring Configuration" on the Server menu and press Enter to display the following
screen.
Main Advanced
Monitoring Configuration
FRB-2 Timer
PCI Enumeration Monitoring:
PCI Enumeration Monitoring Timeout: [ 180]
Option ROM Scan Monitoring:
Option ROM Scan Monitoring Timeout: [ 300]
OS Boot Monitoring:
OS Boot Monitoring Timeout:
POST Pause Monitoring:
POST Pause Monitoring Time-out
F1 Help ↑↓ Select Item
Esc Exit ←→ Select Menu
Option
FRB-2 timer
PCI Enumeration
Monitoring
PCI Enumeration
Monitoring Timeout
Option ROM Scan
Monitoring
Option ROM Monitoring
Timeout
OS Boot Monitoring
OS Boot Monitoring
Timeout
POST Pause Monitoring
ftServer Setup
Security Server
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[ 600]
[Enabled]
[ 180]
-/+ Change Values
Enter Select
Parameter
Disabled Select whether or not to enable the FRB-2 timer.
[Enabled]
Disabled Select whether or not to enable the function to monitor
[Enabled] PCI Device scan.
60-[180]-1200 Set the timeout for PCI Device scan. (unit: second)
Disabled Select whether or not to enable the function to monitor
[Enabled] the extended ROM scan.
60-[300]-1200 Set the timeout of the extended ROM scan. (unit:
second)
Disabled Select whether or not to enable the function to monitor
[Enabled] OS boot-up. If you are starting up from an OS with no
NEC ESMPRO Agent installed, disable this option. If
you use Disaster Recovery Option for ARCServe,
select [Disabled].
60-[600]-1200 Set the timeout at OS boot-up. (unit: second)
Disabled Set whether or not to enable the POST monitoring
[Enabled] function during boot pause. (unit: second)
System Configuration 4-25
Boot Exit
Item Specific Help
Disables/enables the
FRB-2 Timer.
F9 Setup Defaults
Sub Menu F10 Save and Exit
Description