NEC Express5800/320Fd-LR User Manual page 182

4-56 System Configuration
TIPS:
To disable the remote management console function, make the following settings from the
NEC EXPRESSBUILDER DVD. Load the NEC EXPRESSBUILDER DVD on the server,
and from the main menu, select [Tool menu] - [English] - [System Management] - [Set FT
Remote Management Card].- [Set FT Remote Management Card (LAN1/LAN2)]. Select
[Disable] on [Remote Management Console] and register the setting. "Obtain an IP address
automatically (DHCP)" "HostName", "DomainName" and "IP Address" are display only.
The image below shows the setting screen for LAN1 (CPU/IO module #0).
If you use remote management for the first time, the "Waning - Security" dialogue box as shown
below may be displayed. Check the message, and then click [Yes], or [Always]. Then you will see
the logon page. If you are not sure, click [No].