Removing 3.5-inch Hard Disk Drive
Follow the procedure below to remove the hard disk.
IMPORTANT:
Make sure to read "ANTI-STATIC MEASURES" and "PREPARING YOUR SYSTEM FOR
UPGRADE" before you take the following procedures.
1.
Shut down Windows Server 2003.
The system turns off automatically.
2.
Remove the front bezel.
3.
Push the lever of the hard disk to unlock
the handle.
4.
Hold the handle and hard disk to pull them
off.
5.
Install the dummy tray in an empty tray
according to procedures described in
"Installation".
Make sure to install the dummy slot in the
empty slot to improve the cooling effect
within the device.
TIPS:
It may not be easy to pull the lever of slot 3 toward you, but it will not cause a problem for
operation.
System Upgrade 8-9