Ft Remote Management Card - NEC Express5800/320Fd-LR User Manual

2-16 General Description

ft Remote Management Card

(1) Attaching to servers.
This is a card edge part touching to the F-RMC slot inside of the server.
IMPORTANT:
Do not mount this card on other slots or devices in order to avoid a fault.
(2) Management LAN port
This port can be connected to network system, and supports 100Mbps/10Mbps. The port can't
be connected to phone line. The port is also used when managing the server with the
management software NEC DianaScope attached on this device.
IMPORTANT:
Communication mode on the management LAN port cannot be manually set or
changed because the mode is fixed as auto negotiation mode.
Please set the link partner side (switch/hub) as auto negotiation mode.
(3) MAC address
On the back side of the management card, a seal is labeled with MAC address printed.
The MAC address can also be confirmed on the server's BIOS Setup screen.