Problems With Express Setup - NEC Express5800/320Fd-LR User Manual

6-18 Troubleshooting

Problems with Express Setup

Following message appeared when you tried to install Express Setup to the hard disk drive that
has smaller capacity than the specified partition size:
→
Cannot continue the setup.
Specify a smaller partition size than the capacity of connected hard disk drive, and then
retry the setup.
The system partition is created with a smaller size than the specified value.
→
In Express Setup, there could be that the system partition is created with a size which is
about 8MB smaller than the specified size. This has no negative effect on operating the
system.
Data on the peripheral HDD was erased during the Express Setup.
Is there any HDD other than the HDD to install OS attached?
→
Detach external HDD(s) and run the Express Setup again.
.
Cannot configure the details of network adapter.
→
You cannot configure the details of network adapter during setup of NEC Express5800/ft
servers.
You can configure this after the startup of Windows.