NEC Express5800/320Fd-LR User Manual page 106

4-42 Windows Setup
Start RDR Utility by goint to [Start] -
3.
[All Programs] -[RDR] -
[RDR Utility].
IMPORTANT:
If the [Disk Condition] of the OS-installed disk(the slot 1 of the PCI module 0) says
"Boot/Configured/Active/Imported," you do not need to take the procedure 4 to 6.
Proceed to the procedure 7.
If the [Disk Condition] is other than "Boot/Configured/Active/Imported," proceed to the
procedure 4. To view [Disk Condition], go to the left pane of the RDR Utility, click the
OS-installed disk, and see the display on the right pane.
Right-click the disk (Slot 1 of PCI module 0) on which the system is installed on the left
4.
pane of the [RDR Utility] window, and click [Create RDR Virtual Disk].
TIPS:
Depending on the disk status, it
takes time to set RDR, and RDR
Utility may be stopped for a few
minutes. This is not an error. Just
wait for a while.
Click [Yes].
5.
Click [OK].
6.