NEC Express5800/320Fd-LR User Manual page 148

6-6 Troubleshooting
2.
If you have duplexed the HDDs with the RDR (Rapid Disk Resync) feature, unmount and
remove CPU/IO module 1 before starting up the Recovery Console. If the disk error of the
slot 1 of the CPU/IO module 1 is apparent, unmount and remove the CPU/IO module 0.
Note that if you execute the Recovery Console with two CPU/IO module mounted and
implemented, there may occur the OS stop error on the startup after the Recovery Console is
used.
Mount the removed CPU/IO module after using the Recovery Console and normal OS
startup.
<When starting up Recovery Console installed on the system>
(a) Select Microsoft Windows Recovery Console in "Please select the operating system to
start:"
Please select the operating system to start:
Windows Server 2003, Enterprise
Microsoft Windows Recovery Console
(b) When the following message appears on the screen press F6 quickly.
<When starting Recovery Console from Windows Server 2003 CD-ROM>
(a) Insert the Windows Server 2003 CD-ROM into the drive.
(b) When the CD-ROM is set, reset the system (press Ctrl + Alt + Delete) or press the
power switch to power off and on to reboot the NEC Express5800/ft series.
(c) When the following message appears, press any key to start up from the CD-ROM.
IMPORTANT:
Press any key while the message is displayed. Otherwise the system will be
started up from a hard disk and Recovery Console will not be started.
(d) When the following message appears on the screen, press F6 quickly.
3.
When the screen to select SCSI drivers appears, follow the steps below.
(a) When the following screen is displayed, press the S key.