Appendix A Report Monitoring - NEC Express5800 series User Manual

68 CAUTIONS AND RESTRICTIONS
Appendix A
Event messages associated with the MegaRAID Storage system can be displayed on the NEC
ESMPRO Manager. The setting varies depending on the environment as follows:
To monitor messages with the NEC ESMPRO Manager operating on a machine other
than the server to which the monitored MegaRAID is connected, take the following
procedure on the machine.
To monitor messages with the NEC ESMPRO Manager operating on the server to which
the monitored MegaRAID is connected, no setup is required.
Alert report registry setup procedure
1. Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive. If the [Master
Control] menu appears on the screen, close the menu.
Install the MSM manually with the CD which attached the SAS Card, when there is no
MSM installer in the "EXPRESSBUILDER" CD.
2. Start "MSMALTEN.EXE" in "\MSM\" of NEC EXPRESSBUILDER.
Start "MSMALTEN.EXE" in "\MSM\", when you use the CD which attached the SAS Card,
also.
The confirmation dialog box appears. Select [Yes].
3. After the registry setup is completed, the dialog box indicating the termination appears.
Click [OK] to reboot the system.
Report Monitoring