Deleting Logical Drive - NEC Express5800 series User Manual

[Init State]:
Select the logical drive initialization procedure out of No Initialization, Fast
Initialization and Full Initialization.
The default setting is No Initialization.
NOTE: Depending on the disk array controller you use,
some setting values may be restricted for stable system
performance and operation.Refer to manuals coming with
the Disk array controller and server for the settings
previously.
4. Check the contents of the array to be configured.
After checking the contents, click [Finish] to create the logical drives.
To edit the array configuration, click [Modify].
The menu appearing at the selection of [Modify] is the same as that in Step 3 of the manual
configuration. See Step 3 in the manual configuration for setting changes.
3.3.2

Deleting Logical Drive

You can delete a logical drive in the following procedure:
1. Select the logical drive to be deleted in the Logical view.
2. Click [Operations] → [Delete Virtual Disk] on the menu bar.
3. A confirmation/warning message appears. Select [Yes]. Selecting [No] causes the deletion
processing to be canceled.
4. The selected logical drive is deleted from MSM.
IMPORTANT: Any logical drive deleted by mistake cannot
be recovered any more. Before deleting a logical drive, make
sure that it may be deleted.
Operation 41