Auto Configuration - NEC Express5800 series User Manual

3.3.1.1

Auto Configuration

The auto configuration mode allows the draft of the logical drive configuration to be created
automatically depending on the status of unused hard disk drives.
The setting procedure is described below.
1. Click [Auto Configuration] in [Mode Selection] of the Configuration Wizard.
2. The array configuration draft is created automatically.
For redundant array configuration, select [With Redundancy] in [Redundancy Type].
To edit the array configuration, click [Modify].
The menu appearing at the selection of [Modify] is the same as that in Step 3 of the manual
configuration. See Step 3 in the manual configuration for how to change the setting.
Initialization Type
[No Initialization]:
Do not initialize the logical drive after it is created. Do not specify this option.
[Fast Initialization]:
Do Simple initialization. This option initialize the management information of array,
only.
[Full Initialization]:
Initialize the logical drive after it is created, completely. Always use this option, if you
could.
Operation 35