NEC Express5800 series User Manual page 59

2. Select the physical drive to be added from the upper list and click the
the physical drive to the lower list. Then click [Next].
3. The physical drive to be added appears with red characters. Select the RAID level after the
expansion from [New RAID Level] and click [Finish].
4. The confirmation message appears. Select [Yes]. If you select [No], the Add Drive feature
is cancelled.
Select [Group Operations] → [Show Progress] on the menu bar to know the progress of the
execution.
IMPORTANT: Specify only a single HDD in the execution
of Add Drive. If more than one HDD must be specified, first
complete the addition of a single HDD and then start the Add
Drive feature again.
"Add Drive" feature increase capacity of array, but do not
increase capacity of partition which recognize by OS. If you
want to increase partition size, you need to make partition
newly after "Add drive". It is recommended that the
partitions on a logical drive are always backed up before
remake partitions.
Operation 55
button to move