Setup > Time; Setup > Favourites; Setup > Simulate - Navman Datahelm 8120 Installation And Operation Manual

17-12 Setup > Time
once or more until the Setup
Press
MENU
menu is displayed, then select Time:
Local offset
The difference between local time and UTC
(GMT). Change local offset when daylight
saving time starts and ends. The range is 0 to
± 13 hours, in 30 minute steps.
17-13 Setup > Favourites
See section 2-7-2.
17-14 Setup > Simulate
Simulate mode is a way of becoming familiar
with the Instrument (see section 2-6).
once or more until the Setup
Press
MENU
menu is displayed, then select Simulate:
Simulate
Turn simulate mode off
CAUTION
!
Turn simulate mode on
WARNING
!
Never have simulate mode on when the
DANGER
Instrument is navigating on the water.
Mode
CAUTION
There are two choices for Mode:
1 Normal
Simulates the boat moving from the selected
start point at the given speed and heading.
69
1 Select Local offset.
2 Press or to change the offset, then
press .
ENTER
Time format
The options are 24 hour or 12 hour.
Date format
The options are dd/MMM/yy, MMM/dd/yy,
dd/MM/yy or MM/dd/yy.
The options required for Normal are:
Speed: The simulated boat speed to use.
Course: The simulated course over
ground.
Note: To select the start point, go to the chart
window before starting the simulation. Then:
• To start the simulation from the boat
position, press
boat mode.
• To start the simulation from a different
point, move the cursor to that point on the
chart.
Tip: To calculate a course, use the cursor
(see section 3-3).
Tip: As the boat moves, vary Course to
simulate the boat moving off course.
2 Demo
Simulates a boat moving along a route and
automatically displays different Instrument
functions. The options required for Demo are:
Speed: The simulated boat speed to use.
Route: The route to follow.
8120 Installation and Operation Manual
to switch to centre on
ESC