Programming The Ldap Server - Ricoh 8025e Operating Instructions Manual

System Settings
To delete the programmed LDAP server
This section describes how to delete the programmed LDAP server.
A
Press [System Settings].
B
Press [Administrator Tools].
C
2
Press [Program / Change / Delete LDAP Server].
D
Press [Delete].
E
Select the LDAP server you want to delete.
F
Press [Yes].
G
Press [Exit].
H
Press the {User Tools/Counter} key.

Programming the LDAP server

This section describes how to specify the LDAP server settings.
To enter an identification name
This section describes how to enter a identification name.
A
Press [Change] under "Name".
Register a name for the LDAP server that will appear on the server selection
screen of the LDAP search operation.
B
Enter the server's identification name.
C
Press [OK].
To enter a server name
This section describes how to enter a server name.
A
Press [Change] under "Server Name".
Register the LDAP server's host name or IP address.
B
Enter the LDAP server name.
C
Press [OK].
70