Ricoh 8025e Operating Instructions Manual page 84

Copier / Document Server Features
❖ Original Type Priority
You can select the original type effective when the power is turned on, or
modes cleared.
The default setting is Text.
❖ Original Type Display
You can have the original types shown on the initial display.
The default setting is Display.
If you select [Hide], the display is as below.
3
❖ Auto Image Density Priority
You can set whether Auto Image Density is "On" or "Off" when the machine
is turned on, reset, or modes are cleared.
The default setting for "Text" is On.
The default setting for "Text/Photo" is On.
The default setting for "Photo" is Off.
The default setting for "Pale" is On.
The default setting for "Generation Copy" is On.
❖ Copy Quality
You can adjust the quality level of copies for each original type (Text,
Text/Photo, Photo, Pale, Generation Copy).
• Text
Adjust text sharpness.
The default setting is Normal.
"Custom Setting" is the value set during service setup.
Choosing "Sharp" or "Sort" affects the outline sharpness of text.
• Text/Photo
When there are photo(s) and text on the original, select which takes priority.
The default setting is Normal.
"Custom Setting" is the value set during service setup.
"Normal" gives a balanced text and photo reproduction.
• Photo
For a photo original, adjust the finish quality level to match the type of
photo original.
The default setting is Print Photo.
"Custom Setting" is the value set during service setup.
Select "Print Photo" for printed photo originals, and "Coarse Print" for a
coarse dot finish, such as newspaper photos.
Select "Glossy Photo" for printed photo and text originals.
76