Ricoh 8025e Operating Instructions Manual page 230

Registering Addresses and Users for Facsimile/Scanner Functions
Changing the registered SMB folder
This section describes how to change the registered SMB folder.
A
Press [Change] under "Path".
B
Enter the New path where the folder is located, and then press [OK].
You can also use Browse Network to specify a new folder. For details, see "Lo-
cating the SMB folder using Browse Network".
Reference
p.220 "Locating the SMB folder using Browse Network"
To change the protocol
This section describes how to change the protocol.
A
Press [FTP] or [NCP].
7
B
A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
C
Enter each item again.
Reference
p.223 "Registering an FTP Folder"
Deleting an SMB folder
This section describes how to delete the registered SMB folder.
A
[System Settings].
B
Press [Administrator Tools].
C
Press [TNext].
D
Press [Address Book Management].
222