Frymaster YSCFC24GSERIES YSCFC24GSERIES Service & Parts Manual page 19

10. Remove firebox
insulation from back of frypot. From the
rear of the unit, use a prying bar to
carefully pry the top assembly from the
frypot and cabinet frame (single units
only), and set aside. (The top assembly is
secured to the frypot with high-temp
silicone sealant.)
individual pieces on the frypot being
removed.
11. Pull the frypot back and up to remove. On
fryers with built-in filtration systems,
ensure the front oil-return inlet is clear of
the firebox front before lifting frypot out
of cabinet.
If the Firebox Requires Replacement:
12. Remove screws (12) securing the firebox
to the cabinet braces (arrows). Lift the
firebox assembly back and up to remove
from cabinet.
YSCFC SERIES FLATBOTTOM GAS FRYERS
CHAPTER 1: SERVICE PROCEDURES
back, along with
On systems, remove
Use a pry bar to
remove top
assembly from
frypot (single
units only).
Remove the
firebox back and
insulation from
back of frypot.
Remove screws (arrows) securing the firebox to
the cabinet.
1-14