Frymaster RE E4 Installation & Operation Manual page 3

The front ledge of this appliance is not a step! Do not stand on the appliance. Serious injury
can result from slips or contact with the hot cooking oil/shortening.
Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any
other appliance.
The crumb tray in fryers equipped with a filter system must be emptied into a fireproof container
at the end of frying operations each day. Some food particles can spontaneously combust if left
soaking in certain shortening material.
Do not bang fry baskets or other utensils on the fryer's joiner strip. The strip is present to seal
the joint between the fry vessels. Banging fry baskets on the strip to dislodge shortening will
distort the strip, adversely affecting its fit. It is designed for a tight fit and should only be
removed for cleaning.
Adequate means must be provided to limit the movement of this appliance without depending
on or transmitting stress to the electrical conduit. A restraint kit is provided with the fryer. If
the restraint kit is missing contact your local Frymaster Factory Authorized Service Center
(FASC) for part number 826-0900.
Prior to movement, testing, maintenance and any repair on your Frymaster fryer, disconnect all
electrical power from the fryer.
DANGER
DANGER
WARNING
DANGER
DANGER