Tape Operation/Recording
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only in tape deck.
Preparation for recording
1
Load a recordable tape into tape deck with the
full spool to the left.
2
Prepare the source to the recorded.
DISC – load the disc (s)
TUNER – tune to the desired radio station.
AUX – connect external equipment.
When recording is in progress
1
Press DISC, TUNER or AUX to select the
source.
2
Start to play the selected source.
3
Press ● to star t recording.
To stop recording
●
Press 9 on the system.
Setting the sleep timer
The sleep timer enables the system to switch to
Standby mode automatically at a preset time.
●
Press SLEEP/DIM on the remote control
repeatedly and stop at the desired preset turn-
off time.
➜
Following options are available (time in
minutes):
15 p30 p45 p60 p90 p120 pOFF
p......
➜
z
z
"z
" will show on the display panel unless
"OFF" is selected.
38
Disc synchro recording
1
Press DISC to select the disc.
●
You can record programmed tracks in the order
you want.
2
●
Press
to start recording.
➜
"REC" will flash, but the first 9 seconds of the
start passage will not be recorded.
Selecting another track during recording
1
Press ; to interrupt recording.
2
Press O or P to select another track.
3
Press ; to resume recording.
To stop recording
●
Press
.
90
➜ Recording and disc playback will stop
simultaneously.
Timer Operations
To check or change the setting
●
Press SLEEP/DIM once to show the remaining
time before switching off. If you continue
pressing the SLEEP/DIM button, the next
Sleep Timer option will appear on the display.
To cancel the sleep timer
●
Press SLEEP/DIM repeatedly until "OFF" is
displayed or press the STANDBY ON button.