Deactivating The Timer; Activating The Timer; Sleep Timer Setting - Philips FW- FW-C399 User Manual

Clock/Timer
1
Press and hold CLOCK•TIMER for more than
two seconds to select timer mode.
"AM12:00" or "00:00" or the last timer
setting starts flashing.
starts flashing.
TIMER
The selected source will be lighted while
other available sources are flashing.
2
Press CD, TUNER or TAPE to select the
desired source.
Before setting timer, make sure the music source
has been prepared.
CD – Load the disc(s). To start from a specific
track, make a program (refer to "CD Operation -
Programming the disc tracks").
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 2.
3
Press à or á on the system repeatedly to set
the hour for the timer to start.
4
Press í or ë on the system repeatedly to set
the minute for the timer to start.
5
Press CLOCK•TIMER to store the timer.
remains on the display.
TIMER
At the preset time, the selected sound source
will play.
To exit without storing the setting
Press Çon the system.
Notes:
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected. If all the disc trays are not
available, Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.

Deactivating the timer

1
Press and hold CLOCK•TIMER for more than
two seconds.
2
Press Ç on the system to cancel the timer.
"OFF" is displayed and the
26
pg 001-031/C399/37-Eng
disappears.
TIMER
26
Activating the timer (for the same preset
time and source)
1
Press and hold CLOCK•TIMER for more than
two seconds.
2
Press CLOCK•TIMER again to store.

Sleep timer setting

The sleep timer enables the system to switch to
standby mode automatically at a preset time.
1
Press SLEEP on the remote control repeatedly
to select a preset time.
The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ OFF ™ 15 ...
"SLEEP XX" or "OFF" is displayed. "XX" is
the time in minutes.
2
When you reach the desired length of time, stop
pressing the SLEEP button.
is shown, except for "OFF" mode.
SLEEP
The sleep timer is now set. Before the system
switches to standby mode, a countdown of 10
seconds is displayed.
"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"
™ "SLEEP"
To check the remaining length of time
after sleep timer is activated
Press SLEEP once.
To change the preset sleep timer
Press SLEEP again while the remaining sleep
timer is shown.
The display will show the next sleep timer
options.
To deactivate the sleep timer
Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.
11/28/01, 1:34 PM
3139 115 21071