Easy Nam Programming - Samsung STH-N271 Service Manual

[Screen action]

Easy NAM Programming

(1)To set SID to NAM1 in English
(As an example, in case 23 should be set to HSID)
[Note#0] During Easy NAM Programming Mode, SMS/Incoming Call shall be rejected and MWI is NOT displayed.
[Note#1] The default data of each parameter based on SID&MIN is defines in ATT Req.(4047) Appendix L Section 9.3.
("Primary Paging Channel=333 for odd SIDs otherwise 334 for even SIDs",
"Secondary Paging Channel=708 for odd SIDs otherwise 737 for even SIDs", "Access Method=1(active)",
"Overload Class=0 follwed by last digit of MIN", "SID Alpha Tag Control=disable".)
[Note#3] During editing Phone#, it is not possible to enter "*", "#" and "P(Pause)".
[Note#4] If the seting value for SID is not in the valid range (from 0 to 32767), the normal origination procedure will be
executed when hitting SEND Key.
5/17/1999 Mon
Menu
#23#*
Save
NAM-1
Phone
Programming
Yes
ESN
ec965ad7
OK
Enter Own Number
5251111111
OK
SAVE?
Yes
Saved
SAMSUNG Proprietary-Contents may change without notice
1:28 AM
Names
No
Exit
Exit
No
6-3
STH-N271
Easy NAM Programming
Idle Screen