Nam Programming - Samsung SCH-470 Service Manual

3 . NAM Programming

3.1 Switching the NAM(
If you performs NAM writing mode, you have to enter the password, '4, 7, *, 8, 6, 9, #, 0, 8, #, 9'.
Keypads using in NAM writing mode are as follows :
0~9 : numberic keys
¶N, # : Use to specify the variable which include several value.
VOLUME KEY : Use to switch the next item
CLR KEY : Use to retouch a wrong digit
END KEY : Use to end a NAM writing mode
: Use to store data and switching the next function
: Use to swich the last menu
Caution
-If you enter the NAM program mode, the last data displays on screen . When you need not change the
data, press VOLUME key to go to the next item.
-You can modify the data by entering a new data. And if you enter a wrong digit, press CLR to delete the
last digit.
-If you enter a wrong digit in the middle of NAM entering, continue to enter the next digits. After that
check and modify the data using volume key
- While you check the data using volume, you can store the data by pressing STO key.
- When you enter the NAM, as there are necessary information enter the phone number and LOCK code
and press STO key.
When you enter NAM programming, display following five items.
1. GENERAL ; Display the variable used commonly NAM.
2. Setup NAM 1 ; Display the variable of CDMA used commonly when you select NAM 1.
3. Setup NAM 2 ; Display the variable of CDMA used commonly when you select NAM 2.
4. Setup NAM 3 ; Display the variable of CDMA used commonly when you select NAM 3.
5. Setup NAM 4 ; Display the variable of CDMA used commonly when you select NAM 4.
If you don't store the data by pressing STO key after modifying as explains, the data does not change.
You can check the data by pressing VOLUME key without changing the data.
Samsung Electronics
Numeric Assignment Module
) writing mode
3-1