Replacing Fuses In 17Ec And 17Ecs Models - Frymaster 17EC Installation, Operation & Service Parts Manual

5.4

Replacing Fuses in 17EC and 17ECS Models

1. Disconnect unit from electrical power and remove the cover from the contactor box.
2. The 5-amp fuses are located on the left side of the box. The fuse for the controller is located
nearest the front of the box. Use a fuse puller to remove the blown fuse and install the
replacement.
Remove this screw and lift the
cover from the contactor box.
3. Replace the component box cover, and reconnect the unit to the electrical power supply.
This fuse is for the controller.
This fuse is for the basket lift.
5-4
Master Power Switch