Decalcifying - Jura Capresso IMPRESSA X90 Instructions For Use Manual

Switch on your machine by pressing ON/OFF
Press key until you can hear an acoustic signal.
EMPTY TRAY (FILL WATER might show as well)
Put a sufficiently large container under the coffee-spout (15)
in order to prevent cleaning liquid from running into the drip
tray.
ADD TABLET (Fig. 9) / PRESS CLEANING
UNIT CLEANING / PLEASE WAIT
EMPTY TRAY
PLEASE WAIT
RINSE UNIT
COFFEE READY
The powder funnel for pre-ground coffee should be cleaned
after each cleaning process. Remove it from the machine,
rinse it with hot tap water and replace it after drying.

16. Decalcifying

Your machine has an integrated decalcifying program. It lasts
approx. 50 minutes.
Please use Jura decalcifying tablets only. These are available from
your Jura dealer.
Run the decalcifying program only after the machine has
been switched off for at least 5 hours and has cooled down
completely. The running decalcifying program must not be
interrupted.
If using acidic decalcifying agents be sure to immediately re-
move any splashes and drops from delicate surfaces, especi-
ally natural stone and wooden surfaces, or take correspond-
ing precautions.
18
In any case please wait until the filled decalcifying agent is
key
used up and the tank is empty. Never top up the decalcifying
agent.
Remove and empty water tank.
Replace empty water tank.
Switch off your machine by pressing ON/OFF
cool down for approx. 5 hours.
Open cover (3).
Press key
Pour 0.6 litres of water into a container and completely dis-
solve the contents of a blister pack (2 tablets). Then fill the
mixture into the water tank.
Place a sufficiently large container under the pivoting nozzle
(20). Remove the Profi Auto-Cappuccino/Caffè Latte.
Turn selector switch for coffee (19) to the symbol
key .
When an acoustic signal is heard place a container under the
height-adjustable tea-spout (22).
Inside the machine the decalcifying agent is conducted to the
drip tray.
until you can hear an acoustic signal.
EMPTY TRAY
AGENT IN TANK
AGENT IN TANK / OPEN TAP / PRESS CALC
UNIT DECALCIFYING / PLEASE WAIT
PRESS CALC
UNIT DECALCIFYING / PLEASE WAIT
CLOSE TAP
UNIT DECALCIFYING / PLEASE WAIT
EMPTY TRAY
key and let it
and press