Table of Contents
Advertisement
Output Tray
Sets the tray to which the printed paper is ejected.
[Center Tray] (default)
[Rear Tray]
[OffsetCatchTray]
Note
• [Rear Tray] can be set when the optional rear tray is installed.
• [OffsetCatchTray] can be set when the offset catch tray (optional) is installed.
Bypass-Wait User
Printing is started by operation on the printer (pressing the <Eject/Set> button) after printing
by feeding from the bypass tray is instructed. The default is [Off].
Note
• This item can be set when the bypass tray (optional) is installed on DocuPrint 205/255/305.
Font
Kanji
Sets the typeface of the double-byte character set (kanji).
[ShuSong] (default)
[FangSong]
[Hei]
[Kai]
Alphanumeric
Sets the typeface of the single-byte character set (ANK) to [Roman] (default) or [Sans Serif].
Page Position
Sets the paper position and whether or not the sheet feeder is being used when cut sheet
is selected for [Document Size].
Candidate values are shown below.
[CSF Off] (default)
Sets off for the cut sheet feeder setting.
[CSF On]
Sets on for the cut sheet feeder setting.
Note
• [Page Position] cannot be set when continuous roll paper is selected for [Document Size].
2.2 ESC/P Mode Menu Settings
17
Advertisement
Table of Contents
