About The Mode Menu - Xerox DocuPrint 205 Settings Manual

About the Mode Menu

The ESC/P mode menu is used to set items specific to ESC/P emulation.
You can change the mode menu settings while the printer is printing. When this is done, the
changed settings take effect from the next job.
The mode menu is configured from the following levels.
• Mode menu > Menu item > Item > Candidate value
Note
• Some menu items do not have items.
Sometimes they are divided into item 1, item 2 and item 3. (Called item hereafter.)
ESCP
Mode menu
The diagram shown above represents a portion of the levels in the ESC/P mode menu.
Refer to
• Operations and items that can be set: "2.2 ESC/P Mode Menu Settings" (P. 14)
Features Menu
Stored Jobs Menu
Menu item
Paper Tray Auto
Tray1
Tray2
Output Size A4
A3
A5
Document Size SEF
LEF
A4 SEF
At startup Factory
No.01 - 05
Retrieve Factory
No.01 - 05
Item
2.1 About the Mode Menu
Candidate value
13