Configure Before Scan; Xerox ® - Xerox DocuMate 4799 User Manual

Detailed information about these text file formats, and instructions for setting up the OCR options, are in the
section Scanning with Optical Character Recognition (OCR)
To select a file type for the text format:
1. Select the Destination Application.
2. Right-click on the text format icon.
The menu options depend on the type of Destination Application you select.
Example menu for the Text format when
the selected application is Microsoft's
Word and the OneTouch OmniPage
Module is installed.
3. Choose the file type that you want for the text format.
4. Click OK or Apply on the One Touch Properties window.

Configure Before Scan

You can set up the scanner so that, when you press a button or click it on the Button Panel, a different scanning
interface opens before the scanning starts. You can then use the interface to change the Resolution, Scan Mode,
and other settings. When you scan, the scanned image will still be sent as the file type and to the same
Destination Application already selected in the One Touch Properties window for that button.
1. Open the One Touch Properties window.
Scanning and Configuring One Touch
on page 89.
Example menu for the Text format when
the selected application is Transfer to
Storage and the OneTouch OmniPage
Module is installed.
®
Xerox
® 6-47
DocuMate 4799
User's Guide