Power On/Off; Powering On - Xerox 4110 System Administration Manual

Power on/off

Powering on

X er o x 4 5 90 EP S / 4110 EP S S y s te m A dm i n is t r a ti o n G ui d e
Switch the power on before operating the machine. After the
power is on, the machine will take about 5 minutes to warm up
before you can start printing.
Turn the machine off at the end of the day or when it is not in use
for a long period of time. Use the Power Saving feature when the
machine is not in use for a while to reduce power consumption.
CAUTION: Switching the machine power off may cause loss of
data being processed.
Refer to the Power Saver mode section that follows for more
information.
NOTE: If the power is off, all functions of the machine will stop.
Open the power switch cover and press the power switch to
1.
the [ ] position to turn the power on.
|
NOTE: The "Please wait..." message indicates that the machine is
warming up. The machine cannot be used while it is warming up.
1. O v e r v ie w
1-3