Xerox 4110 System Administration Manual page 45

Auto Size Detect
Variable Size
X er o x 4 5 90 EP S / 4110 EP S S y s te m A dm i n is t r a ti o n G ui d e
Standard-sized paper loaded in trays 3, 4, 6, and 7 is
automatically detected.
When setting a non-standard size for trays 3 and 4, set the size in
the X (horizontal) direction within the range of 182-488 mm (7.2-
19.21 in.) and in the Y (vertical) direction within the range 148-330
mm (5.5-13 in.) in 1 mm increments. For trays 6 and 7, set the size
in the X direction within the range 210-241 mm (8.3-9.5 in.) and in
the Y direction within the range 297-330 mm (11.7-13 in.) in 1 mm
increments.
From the Paper Size screen, select Save to save the paper
5.
size and return to the previous screen.
To change the paper type for this tray, select Paper Type.
6.
When selecting Paper Type, keep the following in mind:
• For trays 1, 2, 6, and 7 you can select from six paper types
and from custom paper types 1-5.
• For trays 3 and 4 you can select from seven paper types,
and from custom paper types 1-5.
• In tray 5 (Bypass) you can select from eleven paper types
and from custom paper types 1-5.
• If the optional OHCF (tray 6) is installed, an additional
Paper Type option, Coated Stock, is available for
selection.
4 . S e t ups
4-27