Xerox 4110 System Administration Manual page 57

X er o x 4 5 90 EP S / 4110 EP S S y s te m A dm i n is t r a ti o n G ui d e
Offset stacking (finisher tray)
Select the default offset stacking option for the finishing tray:
• None: If this option is selected, the finishing tray will not offset
any output.
• Offset per set: If this option is selected, the finishing tray will
offset each set of a print job. This option also offsets each job.
3 sets of a job
• Offset per job: If this option is selected, the finishing tray will
deliver all the sets of a job in one stack. When the next job
starts, that job is offset from the previous job in the tray. This
option does not offset each set of a job.
.
Job 1
(with stacked sets)
Default print paper size
Select the default paper size that will be used when printing a
report/list. Select between A4, or 8.5 × 11 inch.
3 sets
of a
job
3 sets of another job
Job 2
(with stacked sets)
4 . S e t ups
4-39