Protrudent/Bumpy Paper - Fuji Xerox DocuPrint M205 b User Manual

Protrudent/Bumpy Paper

Problem
Printed surface got
protrudent/bumpy.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorised dealer.
207 Troubleshooting
Action
Clean up the fusing unit.
1 Load one sheet of paper on the multipurpose feeder (MPF), and
then print a solid image all over paper.
2 Load the printed sheet with the side to be printed on facing down,
and then print a blank sheet of paper.