Send To Application - Xerox DocuMate 4440 User Manual

Send to Application

The Send to Application link allows you to select any application on your computer as the scan
destination.
Supported file types—All file formats in One Touch are available when scanning to this destination.
After you configure the link, as described below, make sure you select a file format that the application
can open. Please refer to
when OCR is installed.
Destination type—This destination type is classified as "Document Management Link". To make it
available in the destination list, you must select Document Management on the Options tab in the
One Touch Properties window.
You must configure this destination before attempting to scan to it the first time. If you scan without
configuring the link first, the One Touch log viewer will open and show that sending the image to the
Send to Application link failed.
• Click the Properties button to open the One Touch Link Properties for the Send to Application link.
From this window, you can configure the default application for this link.
After configuring the link properties, all of the default scan configurations will immediately update
to send to the application you specify in this window. When you create new configurations, the
default settings will also match what you have selected here. If you modify the options in an
individual configuration, changing the options in this Link Properties window will no longer update
to the configurations you modified.
• Click the New, Copy, or Edit button to open the Scan Configuration Properties window. Click on
the Send to Application tab and use this window to set a configuration to scan to a different
application than the one selected in the Link Properties window.
Changing the options in this window only affects the configuration you are creating or modifying.
All other configurations will retain their settings for this destination.
Text Formats on page 68 to see a list of text file formats that are available
Xerox DocuMate 4440
User's Guide
109