Still Image Client - Xerox DocuMate 4440 User Manual

Still Image Client

If you want to specify an application to use for scanning at the start of the process, you can use event
forwarding.
Supported file formats—You cannot select a file format when scanning to the Still Image Client as
the destination application is not selected until after you start scanning.
Destination type—The Still Image Client destination is classified as an "Event Forward Link". To make
it available in the destination list, you must select STI event forwarding on the Options tab in the
One Touch Properties Window.
Please note that if you are have turned on the option to scan to multiple destinations, the Still Image
Client destination cannot be selected. Please click on the Options tab and deselect Enable scanning to
multiple destinations to proceed with scanning to this destination.
1. Open the One Touch Properties window, and select Still Image Client as the Destination
Application.
2. Choose a Scan Configuration and click OK.
3. Start scanning using the button you selected for event forwarding.
Xerox DocuMate 4440
User's Guide
101