Loading Paper; Loading Paper In The Bypass Tray - Xerox DocuPrint C525 A Quick Reference Manual

Loading Paper

This section explains how to load A4 size plain
paper in the portrait orientation in the paper tray.
Paper feed
direction
Note
• Load the paper into this printer while the printer is
switched on.
Refer to
• Paper type and size that can be loaded: "About Paper"
(P. 28)
Loading Paper in the Bypass
Tray
1. Gently pull open the bypass tray cover.
Important
• Do not apply excessive force to the bypass tray cover
when you open or close it, doing so may damage the
machine.
2. Slide the paper guide to the edge of the tray
while pinching the knob on the right paper
guide. The paper guides should be fully
extended.
3. Insert the paper into the bypass tray with the
side to be printed facing up and with all four
corners aligned.
Slide the right paper guide until they rest
lightly against the edge of the paper stack.
Important
• Align the paper guides with the paper width correctly. Be
careful not to bend the paper.
• Do not load paper exceeding the maximum fill line or the
maximum capacity allowed.
4. Close the bypass tray cover.
Note
• When you print on paper fed from the bypass tray, set
the paper size and type in the print driver.
Maximum fill
line
17
Loading Paper
IE
IE