Loading Paper In Paper Trays (Optional); Using The Extension Output Tray - Xerox DocuPrint C525 A Quick Reference Manual

Loading Paper in Paper Trays
(Optional)
1. Remove the paper tray from this printer.
2. Slide the width guides to the edge of the tray.
Squeeze the length guide and slide it to the
desired paper size.
3. Load the paper with the side to be printed
facing up and with all four corners aligned.
Slide the width guides until they rest lightly
against the edge of the paper stack.
Important
• Do not load paper exceeding the maximum fill line or the
maximum capacity allowed.
• Align the width guides with the paper width correctly. If
the width guides are not in place, the paper will not be
properly fed and this may cause paper jams.
18
1 Installing the Printer
Maximum fill
line
4. Push the paper tray completely into the
printer.
5. Set the paper size and type according to the
message displayed on the control panel.
Note
• When you set the paper size and type on the control
panel, press the < > or <
then press the <Eject/Set> button to determine the
selection. For details, refer to "6 List of Menu Items on
the Control Panel" (P. 32).

Using the Extension Output Tray

The extension output tray is designed to prevent
paper from falling from the printer after the print
job is complete.
Before printing a document, pull out the extension
output tray.
If the extension output tray is still not long enough
for the paper you are loading, pull the extension
output tray further.
> button to select the item,